Videotek VTM-2000 Spécifications

Naviguer en ligne ou télécharger Spécifications pour Téléviseurs et moniteurs Videotek VTM-2000. Videotek VTM-2000 Specifications Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 240
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
TWO-YEAR LIMITED WARRANTY
Videotek, Inc. warrants that this product is free from defects in materials and workmanship for a period of two years from the date
of purchase, except for CRTs and LCDs, which are warranted for a period of one year. During this warranty period, Videotek will,
at its option, repair or replace defective products at no charge for the parts or labor. Batteries are not covered in the warranty.
For warranty service or repair, this product must be returned to a service facility designated by Videotek in the original packing or
its equivalent. The purchaser shall insure the product and prepay shipping charges to Videotek, and Videotek shall insure the
product and pay shipping charges to return the product to the purchaser.
The foregoing warranty shall not apply to defects or damage resulting from improper or inadequate maintenance by the
purchaser, connecting the product to incompatible equipment, misuses, operation outside any environmental specification for the
product, improper site preparation or maintenance, or attempts by personnel other than authorized Videotek representatives to
repair or service the product.
No other warranty is expressed or implied. Videotek specifically disclaims the implied warranties of merchantability and fitness for
a particular purpose. The remedies provided by the foregoing warranty are the purchaser's sole and exclusive remedies.
Videotek shall not be liable for any direct, indirect, special, incidental or consequential damages, whether based on contract, tort,
or otherwise.
Printed October 2006
Item #061778 Rev. D
Copyright © 2006 by Videotek, Inc.
All rights reserved.
Contents of this publication may not be reproduced in any form without permission of Videotek, Inc.
This instrument, in whole or in part, may be protected by one or more US (US Patent 6,069,607) or foreign patents or
patent applications.
Specifications subject to change without notice.
___________________________________________________________________________________________________________
IBM is a registered trademark of International Business Machines Corporation
PS2 is a registered trademark of International Business Machines Corporation
Dolby, AC-3, Dolby E, and the double D symbol are registered trademarks of Dolby Laboratories
Videotek and the Videotek logo are registered trademarks of Videotek, Inc.
CineSound is a registered trademark of Videotek, Inc.
IntelliMouse is a registered trademark of Microsoft Corporation
VTM Series
Multi-Format HD/SD-SDI Monitor
Installation and Operation Handbook
Vue de la page 0
1 2 3 4 5 6 ... 239 240

Résumé du contenu

Page 1 - VTM Series

TWO-YEAR LIMITED WARRANTY Videotek, Inc. warrants that this product is free from defects in materials and workmanship for a period of t

Page 2

Contents VTM Series Installation and Operation Handbook iv XDS...

Page 3

General Operation VTM Series Installation and Operation Handbook 3-62 Table 3-37. Description of CineSound Display Diagram Field Identifier Field inf

Page 4 - DIRECTIVE

General Operation VTM Series Installation and Operation Handbook 3-63 Figure 3-47. CineSound 7.1 Channels Display Expanding the Audio Display Press

Page 5

General Operation VTM Series Installation and Operation Handbook 3-64 Audio Menu Selections Pressing and holding the AUDIO function button in the acti

Page 6

General Operation VTM Series Installation and Operation Handbook 3-65 Table 3-39. Option Pane Menu DOLBY METADATA (only if the Dolby option is instal

Page 7

General Operation VTM Series Installation and Operation Handbook 3-66 1. Time Stamp 18. Lo/Ro Surround Downmix 2. Program Config 19. Lo/Ro Cent

Page 8

General Operation VTM Series Installation and Operation Handbook 3-67 Table 3-40. Description of Dolby Metadata Display Diagram Field Identifier Fiel

Page 9

General Operation VTM Series Installation and Operation Handbook 3-68 Figure 3-49. Video Metadata Display Diagram Table 3-41. Description of the Vide

Page 10 - Contents

General Operation VTM Series Installation and Operation Handbook 3-69 Table 3-42. Sample Video Metadata Pane List DATA PRESENT LOCATION/INFO 10/8 BIT

Page 11

General Operation VTM Series Installation and Operation Handbook 3-70 the information is not available in the data stream, the displayed information f

Page 12

General Operation VTM Series Installation and Operation Handbook 3-71 CRC CRC evaluates SD and HD formats. CRC functionality is operational when enab

Page 13

Contents VTM Series Installation and Operation Handbook v Waveform Setup Menu ...

Page 14

General Operation VTM Series Installation and Operation Handbook 3-72 DISPLAY DESCRIPTION Time since Reset 00:00:00 Hr:min:sec, elapsed time since l

Page 15

General Operation VTM Series Installation and Operation Handbook 3-73 ASI (Option VTM-OPT ASI only) The ASI screen is used to analyze the transport s

Page 16

General Operation VTM Series Installation and Operation Handbook 3-74 Figure 3-52. ASI Display Diagram (ATSC Standard Selected) Navigate the screen u

Page 17

General Operation VTM Series Installation and Operation Handbook 3-75 • EIT (Event Information Table) – lists the programs and information for the vi

Page 18

General Operation VTM Series Installation and Operation Handbook 3-76 Figure 3-53. ASI Bandwidth Display ASI Menu Selections Pressing and holding the

Page 19

General Operation VTM Series Installation and Operation Handbook 3-77 Data Format The Data Format menu is used to determine the numeric base for the T

Page 20

General Operation VTM Series Installation and Operation Handbook 3-78 • EMPHASIS indicates No, NA, TC, and J17. No indicates no emphasis. NA indica

Page 21

General Operation VTM Series Installation and Operation Handbook 3-79 Figure 3-54. VTM Classic Display Diagram Table 3-46. Description of Simultaneou

Page 22

General Operation VTM Series Installation and Operation Handbook 3-80 Table 3-46. Description of Simultaneous VTM Classic Display (continued) Key Des

Page 23 - Section 1 ♦ Introduction

General Operation VTM Series Installation and Operation Handbook 3-81 Table 3-47. Description of Sample Alarm Message Key Description 1 Index number,

Page 24 - VTM Series Configuration

Contents VTM Series Installation and Operation Handbook vi Contrast ...

Page 25

General Operation VTM Series Installation and Operation Handbook 3-82 Figure 3-56. Data Mode Display Table 3-48. Description of Data Mode Display Key

Page 26

General Operation VTM Series Installation and Operation Handbook 3-83 The target area within the Pixel Cursor reflects the Pixel Group Display menu se

Page 27 - Video Standards Supported

General Operation VTM Series Installation and Operation Handbook 3-84 The pixel data that created the alarm is highlighted in yellow in the Data Displ

Page 28 - Introduction

General Operation VTM Series Installation and Operation Handbook 3-85 Data Search The Data Search menu is used to select the data ID of the ancillary

Page 29 - Service and Support

General Operation VTM Series Installation and Operation Handbook 3-86 Figure 3-57. Custom Timing Display The upper-left DISPLAY button is high tally

Page 30

General Operation VTM Series Installation and Operation Handbook 3-87 Presets Presets are used to store menu configurations and display settings. A t

Page 31 - Section 2 ♦ Installation

General Operation VTM Series Installation and Operation Handbook 3-88 Table 3-50. Preset Setup Menu NAME PRESET 1 TO 8 RENAME SCREEN NAME * PRESET *

Page 32 - Rack Mounting the VTM Series

General Operation VTM Series Installation and Operation Handbook 3-89 capture the screen. The DISP button is high tally when a frame is captured. On

Page 33 - Connecting the VTM Series

General Operation VTM Series Installation and Operation Handbook 3-90 Blank Page

Page 34 - Ethernet Setup

VTM Series Installation and Operation Handbook 4-1 Section 4 ♦ Global Setup Menu Functions Navigating the Setup Menu Press the SETUP button to access

Page 35 - Installation

Contents VTM Series Installation and Operation Handbook vii Lum Upper/Lower ...

Page 36

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-2 - Rotate the knob to move forwards or backwards in the menu. - Press

Page 37

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-3 Table 4-1. Setup Menu Tables (continued) Setup Menu Item Table Page D

Page 38 - Using the Bypass Feature

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-4 Table 4-2. Video Format Menu (continued) AUTODETECT (Default) - 1080i/

Page 39

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-5 Table 4-2. Video Format Menu (continued) 1080p/25 - 1080p/24 - 1080p/23

Page 40 - Front Panel Illumination

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-6 Table 4-2. Video Format Menu (continued) 1080p/23.98sF - 720p/60 - 720p

Page 41

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-7 Table 4-4. Eye Pattern Setup Menu 0 TO 1.0 UI (Default) 0 TO 0.2 UI 0

Page 42 - Selecting a Pane

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-8 Table 4-7. Picture Setup Menu UPPER LEFT UPPER RIGHT LOWER LEFT LOWER

Page 43 - Option Not Installed Message

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-9 Table 4-7. Picture Setup Menu (continued) T2 - T3 - T4 - 708 - EIA 708

Page 44

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-10 Table 4-8. Video Alarms, Digital Menu ALARM REPORTING SETUP MATRIX SCR

Page 45 - External Reference

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-11 Table 4-8. Video Alarms, Digital Menu (continued) THRESHOLD 625  PAL

Page 46 - Pane Overview

Contents VTM Series Installation and Operation Handbook viii Horizontal Blanking (H Blanking) ...

Page 47 - The Waveform Display

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-12 Table 4-8. Video Alarms, Digital Menu (continued) OFF - - ON - - CRC

Page 48

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-13 Table 4-8. Video Alarms, Digital Menu (continued) THRESHOLD 10 TO 350

Page 49

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-14 Table 4-8. Video Alarms, Digital Menu (continued) OFF (Default) - ON

Page 50

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-15 Table 4-8. Video Alarms, Digital Menu (continued) OFF (Default) - ENA

Page 51

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-16 Table 4-9. Video Alarms, Analog Menu (continued) OFF (Default) - ON -

Page 52

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-17 Table 4-9. Video Alarms, Analog Menu (continued) ENABLE OFF (Default)

Page 53

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-18 Table 4-9. Video Alarms, Analog Menu (continued) OFF (Default) ENABLE

Page 54

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-19 Table 4-9. Video Alarms, Analog Menu (continued) OFF (Default) - - W

Page 55

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-20 Table 4-9. Video Alarms, Analog Menu (continued) THRESHOLD  PAL UNIT

Page 56

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-21 Table 4-10. Time Code Alarms Menu ALARM REPORTING SETUP MATRIX SCREEN

Page 57

Contents VTM Series Installation and Operation Handbook ix PTS Error...

Page 58

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-22 Table 4-11. TS Alarms Menu (VTM-OPT ASI) ALARM REPORTING SETUP MATRIX

Page 59

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-23 Table 4-11. TS Alarms Menu (VTM-OPT ASI) (continued) MGT - VCT - RRT

Page 60

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-24 Table 4-11. TS Alarms Menu (VTM-OPT ASI) (continued) ENABLE - SHORT

Page 61 - Eye Pattern Rise Time

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-25 Table 4-11. TS Alarms Menu (VTM-OPT ASI) (continued) VCT ENABLE - V

Page 62

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-26 Table 4-12. Display Setup Menu DISPLAY COLORS MATRIX SCREEN (See Tab

Page 63

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-27 Table 4-13. Display Colors Menu Black* Blue Green Cyan Red Purple LT G

Page 64 - Trigger Mode

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-28 Table 4-14. Communications Setup Menu (continued) SELECT INPUT A - ON

Page 65

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-29 Table 4-14. Communications Setup Menu (continued) FOLLOW INPUT A - FO

Page 66

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-30 Table 4-15. System Setup Menu PANEL LOCKOUT ENTER PASSWORD SCREEN LO

Page 67

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-31 Video Format Menu The Video Format menu items are described below. Dua

Page 68

Contents VTM Series Installation and Operation Handbook x Jitter Display...

Page 69

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-32 order to display an NTSC signal without 7.5 IRE setup. The NTSC PEDES

Page 70

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-33 • Composite format with Low Pass filter follows the Luma Upper and Lo

Page 71 - Controlling the Vector

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-34 PAL Overlay (Analog Option Required) A PAL signal by default appears i

Page 72

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-35 Persistence Persistence is used to determine how long a data point (pi

Page 73 - Vector Pane Menu Selections

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-36 Figure 4-2. Sample Thumbnail Screen Markers There are three markers a

Page 74

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-37 Table 4-17. XDS Line Selections ID NUMBER FUTURE CONTENT ADVISORY PS

Page 75

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-38 Brightness Picture Brightness is used to make the picture brightness l

Page 76 - Composite Gamut

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-39 Any color selection that is not available is blocked out and not acces

Page 77

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-40 Freeze on Alarm Freeze on Alarm is used to create a frame capture when

Page 78 - RGB Gamut Display

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-41 One RCU Series connects to multiple VTM Series instruments using a mul

Page 79

Contents VTM Series Installation and Operation Handbook xi Figure 3-7. RGB and YCBCR Graticule ...

Page 80 - Picture Display

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-42 Gateway The Gateway is the network address that provides access to an

Page 81

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-43 12. Press the ENT button over ACCEPT to accept the name, or CANCEL to

Page 82

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-44 • ROUTER MODE CHANNEL: Select the channel manually. • SCANNER MODE S

Page 83

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-45 2. Use the NAVIGATION buttons to move the cursor to the SYSTEM menu.

Page 84 - Timing Display

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-46 5. Use the RIGHT NAVIGATION button to move the cursor to the third pa

Page 85

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-47 18. Use the RIGHT NAVIGATION button to move the cursor to select ACCEP

Page 86 - Timing Pane Menu Selections

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-48 Exit Bypass on Alarm The Exit Bypass on alarm submenu is used to disab

Page 87 - Alarm Display

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-49 Figure 4-8. File Navigator Screen The left column of the File Navigat

Page 88

Global Setup Menu Functions VTM Series Installation and Operation Handbook 4-50 Figure 4-9. About Screen

Page 89 - Alarm Status Display

VTM Series Installation and Operation Handbook 5-1 Section 5 ♦ Alarm Descriptions Setting Alarms Most alarms monitor all lines of the video signal.

Page 90

Contents VTM Series Installation and Operation Handbook xii Figure 3-46. CineSound 6.1 Channels Display ...

Page 91

Alarm Descriptions VTM Series Installation and Operation Handbook 5-2 Alarm Message Contents and Limitations Figure 5-1. Sample Alarm Message (VTM Cla

Page 92 - Audio Display

Alarm Descriptions VTM Series Installation and Operation Handbook 5-3 Digital Gamut RGB Upper/Lower The RGB Upper and Lower alarm occurs when any comp

Page 93 - Audio Scales

Alarm Descriptions VTM Series Installation and Operation Handbook 5-4 The following information is displayed when the CRC display is ON and an HD form

Page 94

Alarm Descriptions VTM Series Installation and Operation Handbook 5-5 Table 5-2. CRC Alarm Error Types (continued) Error Type Description RESERVED V

Page 95

Alarm Descriptions VTM Series Installation and Operation Handbook 5-6 Picture Shift The Picture Shift alarm activates when the luma portion of the vid

Page 96

Alarm Descriptions VTM Series Installation and Operation Handbook 5-7 Subtitle Not Updating The Subtitle Not Updating alarm occurs when Subtitles carr

Page 97

Alarm Descriptions VTM Series Installation and Operation Handbook 5-8 Analog Gamut Peak Upper The Peak Upper alarm occurs when active video falls outs

Page 98

Alarm Descriptions VTM Series Installation and Operation Handbook 5-9 For example, assume that the Vertical Interval Test Signal of color bars on line

Page 99

Alarm Descriptions VTM Series Installation and Operation Handbook 5-10 Teletext Not Detected – Analog The Teletext Not Detected - Analog alarm occurs

Page 100 - General Operation

Alarm Descriptions VTM Series Installation and Operation Handbook 5-11 LTC/VITC Compare (TC Sync) The LTC/VITC (TC Sync) alarm occurs when LTC and VIT

Page 101 - Expanding the Audio Display

Contents VTM Series Installation and Operation Handbook xiii Table 3-2. EXT menu...

Page 102 - Option Display

Alarm Descriptions VTM Series Installation and Operation Handbook 5-12 ETR 290 1st Priority The ETR 290 1st Priority menu contains the TS Sync Loss al

Page 103 - Display

Alarm Descriptions VTM Series Installation and Operation Handbook 5-13 PID Error A Packet Identifier (PID) error occurs when a data stream for each PI

Page 104

Alarm Descriptions VTM Series Installation and Operation Handbook 5-14 occur at least every 700 ms. The PTS are only accessible if the transport strea

Page 105 - Video Metadata

Alarm Descriptions VTM Series Installation and Operation Handbook 5-15 • The EIT Error occurs when section zero (S0) or section one (S1) of the Event

Page 106

Alarm Descriptions VTM Series Installation and Operation Handbook 5-16 The MGT table activates the Repetition Error alarm when the appearance of the M

Page 107

VTM Series Installation and Operation Handbook 6-1 Section 6 ♦ External Control Using the Keyboard Commands Table 6-1 lists the keyboard commands use

Page 108 - Teletext

External Control VTM Series Installation and Operation Handbook 6-2 Table 6-1. Keyboard Commands (continued) Function Keystroke Description VAR Q, q

Page 109

External Control VTM Series Installation and Operation Handbook 6-3 Mouse Operation A Microsoft IntelliMouse® or a mouse that supports the Microsoft I

Page 110 - *NOTE: Y=Luma and C=Chroma

External Control VTM Series Installation and Operation Handbook 6-4 Browser Interface The website for each unit is accessed by pointing the web browse

Page 111

External Control VTM Series Installation and Operation Handbook 6-5 Tab/Tab Details Clicking the Tab at the top of the screen will link to the appropr

Page 112

VTM Series Installation and Operation Handbook VIDEOTEK SOFTWARE LICENSE AND WARRANTY The software which accompanies this license (the "Softwar

Page 113

Contents VTM Series Installation and Operation Handbook xiv Table 3-41. Description of the Video Metadata Display Diagram ...

Page 114 - T.S. Format

External Control VTM Series Installation and Operation Handbook 6-6 Table 6-3. Tab/Tab Details Description (continued) Key Field Description 10 SAVE

Page 115 - Embedded Audio Data

External Control VTM Series Installation and Operation Handbook 6-7 Table 6-4. Web Remote Display Description (continued) Key Field Description 5 HO

Page 116 - VTM Classic

External Control VTM Series Installation and Operation Handbook 6-8 Blank Page

Page 117

VTM Series Installation and Operation Handbook 7-1 Section 7 ♦ Troubleshooting CAUTION — these instructions are for use by qualified personnel only.

Page 118

Troubleshooting VTM Series Installation and Operation Handbook 7-2 Warm Start The Warm Start procedure is similar to a cold start. This reset will pe

Page 119

Troubleshooting VTM Series Installation and Operation Handbook 7-3 Table 7-1. VTM Series: Problems, Causes, and Solutions (continued) Problem/Symptom

Page 120

Troubleshooting VTM Series Installation and Operation Handbook 7-4 Blank Page

Page 121

VTM Series Installation and Operation Handbook A-1 Appendix A ♦ Specifications Video Inputs A and B (Digital) Two (2) dual standards inputs accepting

Page 122

Specifications VTM Series Installation and Operation Handbook A-2 Video (continued) Levels  286 mV p-p ± 6 dB (Blackburst NTSC)  300 mV p-p ± 6

Page 123 - Timing Custom Display

Specifications VTM Series Installation and Operation Handbook A-3 Audio Options (continued) Input Connector 37-pin, D-sub, male Impedance: > 20kΩ

Page 124

Contents VTM Series Installation and Operation Handbook xv Table B-6. ETHERNET RJ-45 Connector Pinouts ...

Page 125 - Preset Setup Menu

Specifications VTM Series Installation and Operation Handbook A-4 Control (continued) Alarm Output Relay closure Maximum relay current 350 mA @ 30 V

Page 126 - Capturing a Display

Specifications VTM Series Installation and Operation Handbook A-5 Time Code Input  LTC via back panel connector  Ancillary Time Code (HD only) 

Page 127 - Clear Captured Data

Specifications VTM Series Installation and Operation Handbook A-6 Eye Pattern (continued) Eye display input Displays pre-equalized waveforms Jitter

Page 128

Specifications VTM Series Installation and Operation Handbook A-7 Data Analyzer Displays  Data: Four-word (maximum) display of samples of a particul

Page 129 - Navigating the Setup Menu

Specifications VTM Series Installation and Operation Handbook A-8 Closed Captioning Displays Standards  SD: Implements the digitized form of line 21

Page 130 - Setup Menu and Alarm Tables

Specifications VTM Series Installation and Operation Handbook A-9 Ethernet Standard 10/100 Base-T conforms to IEEE802.3 Connector RJ-45 Performanc

Page 131 - Global Setup Menu Functions

Specifications VTM Series Installation and Operation Handbook A-10 Environmental Operating temperature 0° to +50°C Storage temperature -40° to +65°C

Page 132

Specifications VTM Series Installation and Operation Handbook A-11VTM Audio Options (Supports One) (cont) A3-OPT 4 Adds Dolby decoding to mix down ana

Page 133

Specifications VTM Series Installation and Operation Handbook A-12 Blank Page

Page 134

VTM Series Installation and Operation Handbook B-1 Appendix B ♦ Pinouts Figure B-1. ANALOG AUDIO IN/OUT 37-pin, Male, D-sub Connector For Audio Optio

Page 135

Contents VTM Series Installation and Operation Handbook xvi Blank Page

Page 136

Pinouts VTM Series Installation and Operation Handbook B-2 Figure B-2. DVI-I In/Out Connector Table B-2. Pinouts for DVI-I In/Out Connector Pinout S

Page 137

Pinouts VTM Series Installation and Operation Handbook B-3 Figure B-3. LTC/GPI 26-pin, Female, D-sub Connector Figure B-4. LTC/GPI Breakout Board

Page 138

Pinouts VTM Series Installation and Operation Handbook B-4 Table B-3. Pinouts for LTC/GPI Connector and LTC/GPI Breakout Board Pinout Signal Pinout

Page 139

Pinouts VTM Series Installation and Operation Handbook B-5 Figure B-5. Remote RJ-11 Control Connector Table B-4. Remote RJ-11 Control Connector Pinou

Page 140

Pinouts VTM Series Installation and Operation Handbook B-6 Figure B-7. Ethernet RJ-45 Connector Table B-6. ETHERNET RJ-45 Connector Pinouts Pinout S

Page 141

VTM Series Installation and Operation Handbook C-1 Appendix C ♦ Glossary 601 An international standard (ITU-R BT.601) for component digital televisio

Page 142

Glossary VTM Series Installation and Operation Handbook C-2 Broadcast Legal Encoding video signal parameters to conform to prescribed limits for broad

Page 143

Glossary VTM Series Installation and Operation Handbook C-3 Default A factory preset value or condition. Demodulator A receiver, such as for televisio

Page 144

Glossary VTM Series Installation and Operation Handbook C-4 ENG Electronic News Gathering Encoded Clip Softness In the encoded legalization process, “

Page 145

Glossary VTM Series Installation and Operation Handbook C-5 Frame Store An electronic method of capturing and storing a single frame of video. Gamma T

Page 146

VTM Series Installation and Operation Handbook 1-1 Section 1 ♦ Introduction The Videotek VTM Series multi-format, HD/SD-SDI video monitoring unit is

Page 147

Glossary VTM Series Installation and Operation Handbook C-6 Key Mask In a key effect, it uses a wipe pattern from the wipe pattern generator to restri

Page 148

Glossary VTM Series Installation and Operation Handbook C-7 Multi-Level Effects Applies to any effects generator which can do more than one effect at

Page 149

Glossary VTM Series Installation and Operation Handbook C-8 Program and System Information Protocol (PSIP) Information sent out as part of an ATSC tra

Page 150

Glossary VTM Series Installation and Operation Handbook C-9 Signal to Noise Ratio-8VSB (SNR) As applies to 8VSB transmissions, this is a calculated av

Page 151

Glossary VTM Series Installation and Operation Handbook C-10 VITC Vertical Interval Time Code, a method for recording on to video tape the timecode ad

Page 152

VTM Series Installation and Operation Handbook Index-1 Index A About Screen, 4-49 Alarm Display, 3-49 Log, 3-49, 3-51 Status, 3-51 Alarm Settings Dis

Page 153

Index VTM Series Installation and Operation Handbook Index-2 Closed Caption, 3-45 Size, 4-37 Closed Captioning Displays Specifications, A-8 Cold Start

Page 154

Index VTM Series Installation and Operation Handbook Index-3 Cursors, 3-24 Display, 3-21 Graticules, 3-22 Jitter High Pass Filter, 3-26 Jitter Meter,

Page 155 - NOTE: LT=Light and DK=Dark

Index VTM Series Installation and Operation Handbook Index-4 Panel, 4-45, 4-46 Preset, 4-45, 4-46 LTC Port Description, 2-3 LTC/GPI, Connector, B-3 M

Page 156

Index VTM Series Installation and Operation Handbook Index-5 Return Authorization, 1-7 RGB Gamut Display, 3-40 Router Control, 4-43 Access, 4-43 Confi

Page 157

Introduction VTM Series Installation and Operation Handbook 1-2 • Patented Gamut display • 16 user presets • Illuminated controls and indicators •

Page 158

Index VTM Series Installation and Operation Handbook Index-6 Video standards supported, 1-5 VITS, 5-1 VTM Audio Options Specifications, A-10 VTM Input

Page 159 - Waveform Setup Menu

VTM Series Installation and Operation Handbook 1-3 • VTM-A3-OPT 3 - Advanced Audio Analysis Option. Bargraphs and CineSound®. View up to eight aud

Page 160

Introduction VTM Series Installation and Operation Handbook 1-4 (provides Data Analysis), VTM-OPT ASI, VTM-OPT 40 (affords ability for four source inp

Page 161 - Vector Setup Menu

VTM Series Installation and Operation Handbook 1-5 Video Standards Supported The VTM Series supports the following video standards: For HD/SD Option:

Page 162 - Gamut Setup Menu

Introduction VTM Series Installation and Operation Handbook 1-6 Figure 1-1. VTM Series Front and Back Panels

Page 163 - Picture Setup Menu

VTM Series Installation and Operation Handbook 1-7 Service and Support For service support, telephone the Customer Service Department at 610-327-2292

Page 164

VTM Series Installation and Operation Handbook OPERATOR'S SAFETY SUMMARY CAUTION — these instructions are for use by qualified personnel only.

Page 165

Introduction VTM Series Installation and Operation Handbook 1-8 Blank Page

Page 166 - Display Setup

VTM Series Installation and Operation Handbook 2-1 Section 2 ♦ Installation This section provides information about inspecting, installing, and confi

Page 167 - Freeze From Clock

Installation VTM Series Installation and Operation Handbook 2-2 Rack Mounting the VTM Series When selecting the permanent mounting location for the VT

Page 168 - Communications Setup

Installation VTM Series Installation and Operation Handbook 2-3 Connecting the VTM Series The back panel connectors are illustrated in Figure 2-2, and

Page 169 - Subnet Mask

Installation VTM Series Installation and Operation Handbook 2-4 Table 2-2. Description of Back Panel Connectors (continued) Key Label Description 11

Page 170 - Gateway

Installation VTM Series Installation and Operation Handbook 2-5 Figure 2-3. VTM Series Dedicated PC Connection 3b. For a network connection, connec

Page 171 - GPO Out 1 and 2 Setup

Installation VTM Series Installation and Operation Handbook 2-6 e) (If using DHCP) Press the LEFT/RIGHT button to highlight DHCP. When DHCP is highl

Page 172 - System Setup Menu

Installation VTM Series Installation and Operation Handbook 2-7 Configuring the VTM/TVM Series with the RCU 1000 Remote Control For the following con

Page 173

Installation VTM Series Installation and Operation Handbook 2-8 Using the Bypass Feature The Bypass feature can be used in conjunction with an existin

Page 174

VTM Series Installation and Operation Handbook 3-1 Section 3 ♦ General Operation Terms Pane: One quadrant in a multi-quadrant screen (Quad or Multi)

Page 175

VTM Series Installation and Operation Handbook European Restriction on Hazardous Substance (RoHS), and Waste from Electrical and Electronic Equipment

Page 176 - File Navigator

General Operation VTM Series Installation and Operation Handbook 3-2 Figure 3-2. Sample Multi-Display Types of Controls The VTM Series is controlled

Page 177 - Flash from USB

General Operation VTM Series Installation and Operation Handbook 3-3 Table 3-1. Description of Front Panel Controls Illumination Heading (Group) Desc

Page 178 - Figure 4-9. About Screen

General Operation VTM Series Installation and Operation Handbook 3-4 Table 3-1. Description of Front Panel Controls Illumination (continued) Heading

Page 179 - Setting Alarms

General Operation VTM Series Installation and Operation Handbook 3-5 Selecting an Input for a Pane NOTE: Input C and D buttons will not function if a

Page 180 - Format Change

General Operation VTM Series Installation and Operation Handbook 3-6 Navigating the Pane Setup menu NOTE: A function button can be pressed to exit fr

Page 181 - EDH – SD

General Operation VTM Series Installation and Operation Handbook 3-7 Rotate the knob to move the menu cursor up and down. External Reference Press to

Page 182

General Operation VTM Series Installation and Operation Handbook 3-8 EXT Setup Press the ENT button to access the global Setup menu. For more informa

Page 183 - Pillarbox - HD

General Operation VTM Series Installation and Operation Handbook 3-9 Icons Icons appear in the main title bar and are shown in a specified order (left

Page 184 - Captioning

General Operation VTM Series Installation and Operation Handbook 3-10 Table 3-4. Video Formats and Units of Measure Video Format Unit of Measure High

Page 185 - Loss of Signal

General Operation VTM Series Installation and Operation Handbook 3-11 Table 3-6. Description of Waveform Display Diagram Field Identifier Field infor

Page 186 - Burst to Chroma Phase

VTM Series Installation and Operation Handbook Figure 2. WEEE Compliance Symbol

Page 187 - SC/H Phase

General Operation VTM Series Installation and Operation Handbook 3-12 Figure 3-7. RGB and YCBCR Graticule Figure 3-8. RGB and YCBCR Zoom 0 mV Graticu

Page 188 - Time Code Alarm Descriptions

General Operation VTM Series Installation and Operation Handbook 3-13 Waveform Front Panel Selections The following buttons directly affect the wavefo

Page 189 - CRC Change

General Operation VTM Series Installation and Operation Handbook 3-14 Figure 3-11. Establishing the Sweep Scale NOTE: A menu selection is availabl

Page 190 - Priority

General Operation VTM Series Installation and Operation Handbook 3-15 pane menu, press the V button to view 1V or 3V (three Vertical for SDI when thre

Page 191 - ETR 290 2

General Operation VTM Series Installation and Operation Handbook 3-16 If Variable Gain mode is selected while already in a fixed gain (such as x2.5 or

Page 192 - ETR 290 3

General Operation VTM Series Installation and Operation Handbook 3-17 When the panes are linked by the INPUT button, all WFM, VECT, and GAMUT panes ar

Page 193 - MGT Range

General Operation VTM Series Installation and Operation Handbook 3-18 Waveform Pane Menu Selections Pressing and holding the WFM or DISPLAY PANE butt

Page 194 - EIT Repetition

General Operation VTM Series Installation and Operation Handbook 3-19 Table 3-8. Waveform (SD-SDI) Menu Structure (continued) If CMPST is selected -

Page 195 - Section 6 ♦ External Control

General Operation VTM Series Installation and Operation Handbook 3-20 Filter Selection The filters available are dependent upon the input format. Th

Page 196 - External Control

General Operation VTM Series Installation and Operation Handbook 3-21 Component Sequence (SD-SDI and HD only) Select to enable the component Y, CB,

Page 197 - SpyderWeb II

VTM Series Installation and Operation Handbook Blank Page

Page 198 - Browser Interface

General Operation VTM Series Installation and Operation Handbook 3-22 Table 3-11. Description of Eye Pattern Display Diagram Field Identifier Field i

Page 199 - Tab/Tab Details

General Operation VTM Series Installation and Operation Handbook 3-23 Figure 3-18. Eye Pattern Graticule at Zoom 800 mV Eye Pattern Observation The

Page 200 - Web RCU

General Operation VTM Series Installation and Operation Handbook 3-24 Table 3-12. Horizontal Magnification Conditions Horizontal Mag Format Displayed

Page 201 - SNMP Communications

General Operation VTM Series Installation and Operation Handbook 3-25 When the cursor is selected, the indication will appear at the bottom of the dis

Page 202

General Operation VTM Series Installation and Operation Handbook 3-26 Table 3-14. Eye HD-SDI Pane Menu Structure 10 Hz 100 Hz JITTER HPF 1000 Hz OVERL

Page 203 - Section 7 ♦ Troubleshooting

General Operation VTM Series Installation and Operation Handbook 3-27 Utilizing the Vector Display Pressing the VECT button accesses the Vector displ

Page 204 - Cold Start after VFlash

General Operation VTM Series Installation and Operation Handbook 3-28 Table 3-15. Description of Vector Display Diagram (continued) Field Identifier

Page 205 - Troubleshooting

General Operation VTM Series Installation and Operation Handbook 3-29 Figure 3-22. Vector NTSC Zoom Upper Left Figure 3-23. Vector NTSC Zoom Upper R

Page 206

General Operation VTM Series Installation and Operation Handbook 3-30 Figure 3-24. Vector NTSC Zoom Lower Right Figure 3-25. Vector NTSC Zoom Lower L

Page 207 - Appendix A ♦ Specifications

General Operation VTM Series Installation and Operation Handbook 3-31 Figure 3-26. Vector PAL Zoom Center Figure 3-27. Vector SD with I/Q

Page 208 - Audio Options

VTM Series Installation and Operation Handbook i Contents Section 1 ♦ Introduction VTM Series Configuration...

Page 209 - Control

General Operation VTM Series Installation and Operation Handbook 3-32 Figure 3-28. Vector HD 75% + 100% Graticule

Page 210 - Control (continued)

General Operation VTM Series Installation and Operation Handbook 3-33 Controlling the Vector (For Composite analog video input only) A vector displ

Page 211 - Eye Pattern

General Operation VTM Series Installation and Operation Handbook 3-34 • Expand the upper-right quadrant • Expand the lower-right quadrant • Expand

Page 212 - SDI Freeze

General Operation VTM Series Installation and Operation Handbook 3-35 Figure 3-31. Establishing Cursor Select To enable the Phase cursors, press and

Page 213 - CRC Error Display

General Operation VTM Series Installation and Operation Handbook 3-36 Table 3-16. Vector Analog Pane Menu Structure 75% ANALOG STANDARD 100% POSITION

Page 214 - Magnification

General Operation VTM Series Installation and Operation Handbook 3-37 Vector Setup Press the ENT button to access the global Vector setup menu. For m

Page 215 - Specifications

General Operation VTM Series Installation and Operation Handbook 3-38 Table 3-19. Description of Gamut Display Diagram Field Identifier Field informa

Page 216 - Display Drivers

General Operation VTM Series Installation and Operation Handbook 3-39 outer circle (the UPPER gamut alarm limit) represents the highest allowable ampl

Page 217 - Other Options

General Operation VTM Series Installation and Operation Handbook 3-40 RGB Gamut Display When setting the upper and lower limits, the upper and lower

Page 218

General Operation VTM Series Installation and Operation Handbook 3-41 Table 3-21. Description of RGB Gamut Indicators Key Indicator Description 1 Low

Page 219 - Appendix B ♦ Pinouts

Contents VTM Series Installation and Operation Handbook ii Waveform Front Panel Selections ...

Page 220 - Pinouts

General Operation VTM Series Installation and Operation Handbook 3-42 Gamut Zoom Press ZOOM to cycle through one of six displays of the Composite or

Page 221

General Operation VTM Series Installation and Operation Handbook 3-43 Figure 3-36. Picture Display Diagram Table 3-23. Description of Picture Display

Page 222

General Operation VTM Series Installation and Operation Handbook 3-44 Figure 3-37. Aspect Ratio Source Diagram Picture Pane Menu Selections Pressing

Page 223

General Operation VTM Series Installation and Operation Handbook 3-45 Table 3-26. Picture HD Menu ON DELAY OFF DELAY POSITION Use the H POS and V POS

Page 224

General Operation VTM Series Installation and Operation Handbook 3-46 • CC3 – Secondary synchronous caption service (608 or 708) • CC4 – Special non

Page 225 - Appendix C ♦ Glossary

General Operation VTM Series Installation and Operation Handbook 3-47 Table 3-27. Description of Timing Display Diagram Field Identifier Field inform

Page 226 - Glossary

General Operation VTM Series Installation and Operation Handbook 3-48 scale resolution at 1µS and the minimum timing resolution at .037µS for HD (High

Page 227

General Operation VTM Series Installation and Operation Handbook 3-49 • EXT REF – Reflects current setting of External Reference (selected by pressin

Page 228

General Operation VTM Series Installation and Operation Handbook 3-50 Figure 3-39. Alarm Log Diagram Table 3-29. Description of Alarm Log Display Dia

Page 229

General Operation VTM Series Installation and Operation Handbook 3-51 seconds, the text remains yellow and the alarm duration is incremented. When th

Page 230

Contents VTM Series Installation and Operation Handbook iii Gamut Pane Menu Selections ...

Page 231

General Operation VTM Series Installation and Operation Handbook 3-52 Figure 3-40. Alarm Status Display Diagram Table 3-30. Description of Alarm Sta

Page 232

General Operation VTM Series Installation and Operation Handbook 3-53 Press to page up through the alarm list. Press to page down through the alar

Page 233

General Operation VTM Series Installation and Operation Handbook 3-54 Alarm Log Display The Alarm Log Display menu determines the type of information

Page 234

General Operation VTM Series Installation and Operation Handbook 3-55 • DOLBY EMB. (EMBEDDED) - Dolby Encoded audio information multiplexed onto a se

Page 235 - Index-1

General Operation VTM Series Installation and Operation Handbook 3-56 The displayed inputs can also be monitored as analog signals on the 37-pin, D-Su

Page 236 - Index-2

General Operation VTM Series Installation and Operation Handbook 3-57 Table 3-32. Description of Two Bar Graph Display with Lissajous Diagram Field I

Page 237 - LFE, 3-66

General Operation VTM Series Installation and Operation Handbook 3-58 Table 3-33. Description of Four Bar Graph with Lissajous Display Diagram Field

Page 238 - Index-4

General Operation VTM Series Installation and Operation Handbook 3-59 Figure 3-43. Six Bar Graph Diagram Table 3-34. Description of Six Bar Graph Dia

Page 239 - Index-5

General Operation VTM Series Installation and Operation Handbook 3-60 Figure 3-44. Eight Bar Graph Display Diagram Table 3-35. Description of Eight B

Page 240

General Operation VTM Series Installation and Operation Handbook 3-61 CineSound Display This unique, audio display provides an intuitive view of 5.1,

Commentaires sur ces manuels

Pas de commentaire